• How to choose robotic waterjet cutting workstation?

• What should I pay attention to when choosing a robot waterjet workstation?

• What does the robotic waterjet include?

How to choose a robotic waterjet cutting workstation? The robot water cutting workstation is divided into many parts. Each part can be individually selected and configured. No matter what the configuration is, it can finally be combined to form a robot water cutting system. Let's introduce: What should I pay attention to when choosing a robot waterjet workstation?  What does the robotic waterjet include?

1: Robot selection of robotic water cutting workstation:

There are many conditions for selecting robots. The first thing to note is whether the customer uses a certain brand of robots, such as ABB YASKAWA FANUC, etc. If you have used a brand, it is best to choose the brand of robots you have used. Regarding operation, after-sales service and mutual replacement of graphics programs, etc., it will be easier. If you are purchasing a robotic waterjet workstation for the first time, the accuracy of the ABB robot is slightly higher, the operation of the YASKAW robot is relatively simple, and the FANUC robot is stable, but in general The relative difference is not very big, and more often it will be referenced according to the delivery period and price.

2: How to choose the robot size of the robot workstation?

What should I pay attention to when choosing a robot waterjet workstation? The size of the robot is definitely selected according to the parts to be cut, including the structure of the robot workstation. After years of experience, taking ABB's robots as an example, if it is cutting small and medium-sized cars and truck interior parts, there are two types Choose enough to meet the requirements. One is to choose a robot that is about the same size as ABB4600 for sitting installation. The other is to choose a robot that is about the same size as ABB2400 for ceiling installation. The two structures are equipped with corresponding sizes. The robot can completely cut all the interior parts of small and medium-sized cars and trucks. The above-mentioned ABB robots are only representative. Customers can choose more robot brands and robot models as long as they care about similar cutting areas. 

3: What should I pay attention to when choosing a robot waterjet workstation?

The first thing to consider when choosing a robot workstation is the production output. The output of the ceiling-mounted robotic water cutting workstation is higher than that of the sitting robot. Of course, the output of the ceiling-mounted three-manipulator structure is higher, and the size of the site should also be considered. The occupied space is much smaller than that of the sitting structure, and the distribution result is that the operator operates this robotic water cutting project. The ceiling structure of the robotic water cutting system requires only one operator to complete the operation. The sitting type generally requires Two operators operate. Of course, the sitting structure adds a rotating platform. The sitting structure can also be operated by one person. The above are efficiency, floor space, number of operators, and the equipment protection level required by the company. The plan is confirmed.