The use of robotic waterjet cutting: The robotic waterjet cutting workstation is simple to use. The general workstation can be operated by 1-2 operators. The main point is that different parameters need to be recorded for different cutting materials. The water used in waterjet cutting is tap water, which can be used after treatment.

Repair of robotic waterjet cutting: The robotic waterjet intensifier pump is the equipment unit with the highest maintenance rate. The maintenance of the intensifier pump has professional training and manuals. Generally speaking, the intensifier pump needs to be repaired when there are problems such as unstable waterjet cutting pressure, low waterjet cutting pressure, slow waterjet cutting speed of the robot. The maintenance sequence of the waterjet intensifier pump is generally from easy disassembly or replacement of small parts to maintenance, and then large parts and electrical inspections.

The maintenance method of robotic waterjet cutting: the robot unit in the robotic waterjet cutting equipment, under normal circumstances, is maintained for half a year or 5,000 hours of work. The content of the maintenance is to replace the lubricating oil of each axis of the robot, and then conduct a test run. During the test run, use the instrument to check whether there is any abnormal noise inside each axis of the robot. If there is any abnormal noise, please disassemble and check in time. As for software, we should copy and back up the program of the robot, and make a good record. The high-pressure waterjet system on the robot body should be overhauled. The main aspect is to check whether there is interference and wear. The second is to check the electrical appliances. When the wire is complete, whether there is any suspected leakage, etc.. WINWIN company has a professional robotic waterjet cutting use, maintenance and after-sales team, customers who need to maintain the robotic waterjet cutting equipment, please contact us.