Waterjet Spare Parts 05039771 Carbide Plunger 0.88 Plunger Units

• Part Name：Carbide Plunger 0.88 Plunger Units
• Part Number：05039771
• Technical tips：The service life of the carbide plunger 05039771 of the KMT water jet cutting intensifier pump is very long. Under normal circumstances, the carbide plunger will not be damaged. If frequent replacement occurs, please check the following reasons: 1: Water quality issues, please ensure that the water quality is qualified. Poor water quality will cause impurities to enter between the high-pressure seal and the carbide plunger. When the plunger moves, friction will occur, causing the carbide plunger to wear. 2: The quality of the oil. The oil is also recycled. When the intensifier is repaired or replaced, it will cause oil pollution. Impurities in the oil will wear the carbide plunger. A good solution is to add some powerful magnets inside the oil tank. 3: The temperature of the oil, whether the high-pressure cylinder is heating up, the increase in temperature will cause the oil seal and the high-pressure seal to quickly age, and the aging seal material will become hard, which is also the cause of the wear of the carbide plunger. 4: The quality of high-pressure seals and oil seals. Good-quality seals have high smoothness and good material toughness, which will protect the carbide plunger well, otherwise it will damage the carbide plunger.