20454426 Robot waterjet robot high pressure filter element

• Introduction：The application of 20454426 short stop filter on robot high pressure filter element, it’s to produce good quality water. Robot waterjet cutting systems have very strict requirements for water quality. Good water quality can protect the accessories of the high-pressure waterjet system and extend the service life of each accessory. For water quality treatment, the robot waterjet cutting manufacturer will install purified water at the forefront of the entire system. Softened water treatment system is the basic requirement to ensure water quality. The treated softened water is called working water. The path of working water is through low-pressure water pump, high-pressure pump, high-pressure pipe and various joints, etc. There will be many Impurities, such as precipitated scale, iron chips after parts wear, particles generated by the aging of the sealing device, etc., these impurities will directly cause the nozzle to block. In order to prevent such failures, the robot water cutting manufacturer will be in front of the cutting head. Robot waterjet robot high pressure filter element, normally the 20454426 short stop filter is added to the middle of the high-pressure pipe to block the physical particles generated in the middle and protect the nozzle. This high-pressure water filter element needs to be replaced regularly.
• Parameters：Part number: 20454426 Part name:　Short Stop Filter Element KMT Waterjet Short Stop Filter Element, 60,000 psi - 90,000. Used with 20454363 - 60,000 psi Short Stop adapter and 20454366 - Short Stop adapter and in 90,000 psi applications