Robot waterjet high pressure water gauge

• Introduction：In the robotic waterjet cutting system, the robotic waterjet cutting manufacturer will install a Pressure Gauge in an obvious position of the workstation. This robot waterjet high pressure water gauge detects the current high-pressure water pressure of the ultra-high-pressure water jet, and the waterjet high pressure gauge monitors the current high pressure. At the same time, there are two test gauges installed in the intensifier pump of the robot waterjet cutting. Water pressure, the pressure is generally between 0.6MPa-0.8MPa, the displayed value of the oil pressure gauge is related to the performance of the intensifier pump, the oil pressure gauge is generally 16MPa-20MPa, and the ratio of oil pressure to water pressure is 1:20. The explanation is that when the oil pressure displays 20MPa, the Pressure Gauge will display 400MPa (4000bar). Of course, after installing this robot waterjet high pressure water gauge, the user will intuitively observe the current high-pressure water pressure outside, which is very convenient.
• Parameters：Part number: 05125836 Details: 0.25 HP, Bottom Mount,6” Face, Glycerin filledFor use on 4,100 bar pumps