Principle analysis of softened water treatment system

The water softening equipment in the water jet cutting robot is mainly used to reduce the water hardness and remove the calcium and magnesium ions contained in the water. The water softening equipment cannot reduce the total salt content in the water during the entire softening process.

Backwashing: The water softening equipment after cutting the car interior parts by the water jet cutting robot arm for a period of time will intercept a lot of the dirt brought by the raw water on the top of the resin. After the dirt is removed, the ion exchange resin can be completely exposed , The effect of regeneration can be guaranteed. The backwashing process is that water washes in from the bottom of the resin and flows out from the top, so that the dirt intercepted by the top can be washed away. This process generally takes about 5-15 minutes.

Salt absorption (regeneration) of the softened water equipment: the process of injecting salt water into the resin tank. The traditional equipment uses a salt pump to inject the salt water. The water jet cutting robot integrated system uses a fully automatic device with a built-in ejector to suck the salt water in.

The above is an introduction to the working principle of the softened water treatment system in the water jet robot cutting system. If you want to know more, please consult us.